How to Upgrade your Computer RAM?

If your desktop PC has slowed down, then the memory shortage or RAM may be the culprit. A RAM upgrade is a quite easier and is often the most cost-effective upgrade that you can make to speed up a sluggish computer. PCs that had more than enough RAM when they were new often have trouble keeping up with the demands of the latest programs after a few years. New operating systems almost always call for more memory, too. When a computer runs short of RAM, it’s forced to swap the overflow data on and off of the hard drive, which can significantly slow performance.

upgrade ram

Before upgrading, you need to figure out whether extra RAM is needed by your PC or not, how much RAM can it support, what kind of RAM will be supporting your PC,etc. The steps to diagnose the memory storage and other issues mentioned before are discussed in this tutorial.

How Much Memory Do Your PC Have?

Firstly, you need to find out is how much memory your PC actually have. To do that, right-click on the “My Computer” icon on your desktop, and choose Properties. For Windows Vista and Windows 7, the procedure is little bit different, where you will have to click on the windows icon in the bottom left of your screen and then right click on “Computer”. The window that comes up will tell you the basics about your system, including how much memory you have onboard.

computer properties

 Does Your PC Have Any Open Slots?

The next step after figuring out how much memory is present on board, is to determine how many empty memory slots you have in your system. That helps you figure out whether you just need an extra memory stick or two, or buy completely a new memory because all of the slots are taken. To find this out, you need to open your chassis or the casing of the CPU. The DIMM (Dual inline Memory Module) slots are smaller slots usually located right next to the processor. In many cases, when you first open the case you can discover only one or two of your RAM slots are actually being used.

By doing this, you can easily take a look at what type of RAM your PC have and in what configuration it needs be installed. The alternative way to find out all kinds of useful information about your system, including what kind of RAM you are using now without opening the case, by simply downloading CPU-Z, a freeware program that let you know about your system hardware. Another application known as crucial that will scan your system and tell you what you are running now, how it is configured, and what the optimal upgrade would be. These tools can also tell you if your particular motherboard has a limit to the amount of memory you can install.

How much RAM is Needed by the PC?

If open slots are available, next is to decide how much more memory you want to add in your PC. In case you want to double your PC memory, then all you need to do is get another identical module or stick of RAM and make sure that a DIMM slot is available. If you want to add more than that, then you have to find a memory module with a higher RAM capacity.

In case all of your DIMM slots are filled, then you have to replace the current memory modules with a higher RAM capacity. The average Windows XP user should be satisfied with 1GB of RAM.

What Kind of RAM Works On Your PC?

It is very important to figure out what kind of RAM will work on your PC is it DDR, DDR2, or DDR3 memory. Always make sure to install RAM according to the design of DIMM slot, as you won’t be able to install one kind of memory stick in a slot meant for a different type. DDR won’t fit in slots meant for DDR2 or DDR3, and so on. Choose RAM that is compatible with your motherboard.

After you have finished installing the RAM, all you get in return is a desktop PC that is significantly faster.



No comments yet.

Leave a Comment